Operation
-
Press the Power On/Off button on the back of each light to be used. The light will power white. Note: the system is configured for five lights as a default.
-
Press the ON/OFF button on the controller. The lights will change from white to:
L 1 – RedL2 – GreenL3 - Blue
L4 – PurpleL5 – White
Note The light color determines the corresponding light number.
-
Select AT, the lights will randomly activate based upon the time selected. The other option is to select the lights by pressing the light number. do not press and hold
-
If a light is reacted to in time, no beep will sound. If you do not react to it in time, the light will beep.
-
press this button to select the time in between when a light will activate
-
press this button to change the brightness of the light
-
-
Select the time intervals (.5 to Xs seconds) by pressing corresponding number on controller
-
press this button and lights will activate in a random time setting from .5s – 6s
-
-
Select the color by pressing the “Bar” icon. Color choices Red, Green, Blue or White
-
To elevate the level of difficulty, choose the “Color” button. By doing so, each time a light is activated it will be a random color.
-
Press ON/OFF button to power off. Note: lights will automatically turn off if there is no activity for 60 minutes. To reactivate, follow steps above.
This is a Paragraph. Click on "Edit Text" or double click on the text box to start editing the content and make sure to add any relevant details or information that you want to share with your visitors.
Configuration – the system can be set up to use two to five lights
-
Select the which lights will be active by choosing the respective button (L1 – L5) on the remote.
-
To remove a light:
-
If all five lights have been synced you can remove a light from the sync by pressing the light number (L1 – L5) on the controller and holding down for 10 seconds – the red led on the controller will flash slowly at first and then speed up and turn off to indicate the light is un-synced, the light will flash.
-
-
To add light:
-
To add light back into the configuration, you will need to identify which light (L1-L5) is not synced (red is for L1 light, the green is for L2 light, the blue is for L3, the purple is for L4 light, the white is for L5 light.) Example if when press ON/OFF Green, Blue & Purple activate, that means you can sync either L1 or L5.
-
-
Power the light ON and hold the reset button on the back of the light until the light flashes, then press and hold the L1-L5 button that is not synced on the controller. The red LED will flash slowly and increase in speed, when synced the light will beep and the red LED will power off
-
The unit will remain in this configuration until reset.
Note: the system is configured for five lights as a default.
System Maintenance
1. When the battery is low, the buzzer will continuously sound. Shut down and recharge. System takes up to three hours to recharge and once charged it will last up to 30 hours.
2. When charging, power off system. Red light indicates system is charging; green indicates fully charged.
See our website ReflexxRLT.online for videos of use and feel free to forward your videos and we will post and tag you on our IG site Reflexx.RLT